System Parameters

System parameters are global parameters for the installation. These parameters defines the behavior in a wide range of areas like Background jobs, Reporting and User Assistance. The most important system parameters that are supposed to be set when configuring a new installed system before taking into operation are described here.

All system parameters:

Parameter

Category

Behavior

Logging of background processes

Background Jobs

Logging of background processes. Default value is OFF.

Cleanup age limit in days for
completed background jobs

Background Jobs

The age of completed background jobs to be removed by cleanup processes. Default value is 7 (days). (Note: Background jobs marked as "Exclude From Cleanup" will not be removed.)

Scheduled tasks process startup

Background Jobs

The values are ON/OFF and defines if the scheduled tasks process is started or not. Default value is ON.

Number of background processes

Background Jobs

This parameter limits the number of job slave processes for the Scheduler. The maximum number of job slave processes for Scheduler is determined by the lesser of the values of JOB_QUEUE_PROCESSES and this parameter. This cannot be set to 0. Default value is 10.

NOTE: This parameter is deprecated from Apps9 onwards since this does not make any impact to control the number of background jobs as it has been deprecated from Oracle Database 11g Release 2 (11.2) onwards. In future this will be obsolete in IFS Applications as well. Use JOB_QUEUE_PROCESSES oracle parameter instead.

Cleanup age limit in days for inactive
Scheduled tasks

Background Jobs

The age of inactive scheduled tasks to be removed by cleanup processes. Default value is 7 (days).

Cleanup age limit in days for
background jobs with warning

Background Jobs

The age of background jobs with state "warning" to be removed by cleanup processes. Default value is 30 (days). (Note: Background jobs marked as "Exclude From Cleanup" will not be removed.)

Cleanup age limit in days for
background jobs with errors

Background Jobs

The age of background jobs with state error to be removed by cleanup processes. Default value is 180 (days). (Note: Background jobs marked as "Exclude From Cleanup" will not be removed.)

Scheduled tasks process startup interval
(seconds)

Background Jobs

This parameter defines how often the scheduled tasks process wakes up and checks if there are any scheduled tasks to submit on the batch queues. Default value is 60 (every minute).

Connectivity Inbox process available

Connectivity

The values are ON/OFF and controls the use of IFS/Connectivity Inbox background job process. Default value is OFF.

Connectivity Outbox process available

Connectivity

The values are ON/OFF and controls the use of IFS/Connectivity Outbox background job process. Default value is OFF.

Connectivity Inbox process restartup
interval (seconds)

Connectivity

This is the number of seconds for the process running Inbox background jobs to wait before checking for new jobs to process. Default value is 30 (seconds).

Connectivity Outbox process restartup
interval (seconds)

Connectivity

This is the number of seconds for the process running Outbox background jobs to wait before checking for new jobs to process. Default value is 30 (seconds).

Cleanup age limit in days for accepted
messages in Outbox

Connectivity

Age of accepted messages in the Outbox to be removed by cleanup processes. Default value is 7 (days).

Cleanup age limit in days for accepted
messages in Inbox

Connectivity

Age of accepted messages in the Inbox to be removed by cleanup processes. Default value is 7 (days).

Cleanup age limit in days for Application Message Statistics Connectivity Age of Application Message Statistics to removed by cleanup processes. Default value is 7 (days).

Info Cards framework

Custom Objects

Info Cards framework enabled or disabled. Default value is ON.

Tablespace for custom LOB's

Custom Objects

Default tablespace for Custom Objects LOB's

Custom Fields framework

Custom Objects

Custom Fields framework enabled or disabled. Default value is ON.

Tablespace for custom indexes

Custom Objects

Default tablespace for Custom Objects indexes

Tablespace for custom tables

Custom Objects

Default tablespace for Custom Objects tables

Conditional Fields framework Custom Objects Conditional Fields framework enabled or disabled. Default value is ON.
Custom Pages framework Custom Objects Custom Pages framework enabled or disabled. Default value is ON.

Data archive process startup

Data Archive

Data archive process started or not. Default value is OFF.

Data archive process startup interval
 (seconds)

Data Archive

This parameter defines how often the data archive process wakes up and checks if there are any data archive orders to execute. Default value is 3600 (every hour).

Data Migration default tablespace
for dynamically created tables

Data Migration

Default tablespace for tables used by the IFS Data Migration. Default value is ‘*’ (No tablespace defined).

Data Migration default tablespace for dynamically created indexes

Data Migration

Data Migration default tablespace for dynamically created indexes

Data Migration alternative user for replication jobs

Data Migration

Data Migration alternative user for replication jobs

IFS EOI Model Name Enterprise Operational Intelligence Default IFS EOI model name
IFS EOI Authentication Type Enterprise Operational Intelligence Windows Integrated Authentication (WIA) or Basic Authentication (BASIC_AUTH).
Default value is WIA.
IFS EOI Base URL Enterprise Operational Intelligence Base URL to EOI

Event Registry date and time format

Event Management

The date and time format used by Event Registry. This parameter controls the syntax when defining conditions in the Event Registry. Default value is YYYY-MM-DD HH24.MI.SS.

Event Registry date format

Event Management

The date format used by Event Registry. This parameter controls the syntax when defining conditions in the Event Registry. Default value is YYYY-MM-DD.

Event Registry time format

Event Management

The time format used by Event Registry. This parameter controls the syntax when defining conditions in the Event Registry. Default value is HH24.MI.SS.

Proxy Server used for HTTP requests
 

HTTP

Sets the proxy to be used for requests of the HTTP or other protocols, excluding those for hosts that belong to the domain specified in "List of hosts and domains for which no proxy should be used". The proxy may include an optional TCP/IP port number at which the proxy server listens. The syntax is [http://]host[:port][/], for example, www-proxy.my-company.com:80. If the port is not specified for the proxy, port 80 is assumed. Default value is "*" (no proxy).

List of hosts and domains for which no proxy should be used
 

HTTP

A comma-, semi-colon-, or space-separated list of domains or hosts for which HTTP requests should be sent directly to the destination HTTP server instead of going through a proxy server. Optionally, a port number can be specified for each domain or host. If the port number is specified, the no-proxy restriction is only applied to the request at the port of the particular domain or host, for example, corp.my-company.com, eng.my-company.com:80. When no_proxy_domains is NULL and the proxy is set, all requests go through the proxy. When the proxy is not set, UTL_HTTP sends requests to the target Web servers directly. Default value is "*" (no hosts or domains).

Permission set to be granted Lobby presentation objects by default Lobby Permission set to be granted Lobby presentation objects by default.
No default permission set.

Number of days ahead of expiration for subscription renewal prompt

Object Subscriptions

This parameter controls the number of days before the subscription renewal message should be sent for a subscription which is about to expire.

Url or path of the company logo file used in quick print

Output Channels

This is initially automatically set during the Extended Sever installation but can be edited manually here.

PSO Integration Queue ID PSO Integration Batch Queue ID for the PSO Integration.

Replication process available

Replication

Values are ON/OFF and control the replication background process on a master site. The replication background process checks the replication queue. When the background process finds a row in the replication queue it creates a Connectivity message. Connectivity sends the message to the slave(s). The process is only needed on a master site. Default value is OFF.

Replication process restartup interval
(seconds)

Replication

Controls the replication background process interval between wake-ups of the process. The process will sleep for the specified number of seconds before checking for a new row in the replication queue. The replication background process creates a connectivity message and place it in the connectivity outbox. The message will be processed by the connectivity outbox process. This means that the Connectivity Outbox process available parameter needs to be ON in order for connectivity to process the message. Default value is 30 (medium restart)

Cleanup age limit in days for replicated
messages

Replication

Controls the cleanup of the replication queue and the cleanup of replication messages in the connectivity outbox and inbox. The cleanup only removes rows that have been successfully processed. The value is specified in days. Fraction of days is allowed. Default value is 0.007 days (1 minute).

Log Replication Send warnings

Replication

Values are ON/OFF and controls if warnings on the receiving instance should be sent or not. Default value is ON.

Log Replication Send information

Replication

Values are ON/OFF and controls if information on the receiving instance should be sent or not. Default value is OFF.

Log Replication Receive warnings

Replication

Values are ON/OFF and controls if warnings, on the receiving instance should be logged or not. Default value is ON.

Log Replication Receive information

Replication

Values are ON/OFF and controls if information, on the receiving instance should be logged or not. Default value is OFF.

Collect Replication statistics information

Replication

Values are ON/OFF and controls the collection of statistics upon replication. Default value is OFF.

Replication statistics date key format

Replication

Values are YYYY-MM-DD/ YYYY-MM-DD-HH24 and controls the sum up interval for the statistics. With a value of YYYY-MM-DD statistics will be summed up daily and a value of YYYY-MM-DD-HH24 will sum up the statistics hourly. Default value is YYYY-MM-DD.

Report Plug-in output directory

Reporting

Path where the output of the report formatter plug-ins are saved. Default value is *.

Default paper format

Reporting

Values are A4/LETTER/OTHER and defines what paper format should be used by default when printing reports. This parameter will be overridden per user if specific settings of paper format are made for users. Default value is A4.

Show only the assigned logical printers and
default physical printer

Reporting

This parameter defines whether the default printer settings in APPSRV module are used. The values are YES/NO. If value is YES, the printers shown when ordering a report through the print dialog are filtered. i.e. Only the default physical printer and the logical printers assigned for the report/user are displayed. Default value is YES.

Cleanup age limit in days for printouts
in Print Manager

Reporting

The age of printout logs to be removed by cleanup processes. Default value is 7 (days).

Cleanup age limit in days for reports in Archive Reporting The age of archive items to be removed by cleanup processes. Default value is 7 (days).

Information Access Layer (IAL)
Oracle user

Reporting

The name of the Oracle user containing the IAL when enabled, or * if IAL is not configured.

Information Access Layer (IAL)
replication setup

Reporting

The values are ON/OFF and indicate the possibility to replicate objects. Useful when performing large updates to the database, to make sure there are no heavy background jobs performing replication activated in the meantime. Default value is ON.

Fallback image path for Report Designer when image is not in the database

Reporting

 If the image used in the report layout is not found in the database the location specified under this parameter is used to fetched the image.

Maximum allowed XML size for Report Designer reports (KB)
 

Reporting

This parameter controls the size of the XML data, to prevent the out of memory crashes in middle tier. This limitation is checked before formatting the report from Report Formatter and if the memory consumption exceeds the allowed values, appropriate messages are shown to the user. The default values is 0 (zero), which is meaning that there is no limit.

Breakpoint XML size for when to format Report Designer reports in memory or using disk storage (kB)
 

Reporting

This parameter controls the Disc Cache. With it, you can make sure that small reports are handled in memory without being swapped out to disc. Disc Cache will slow the PDF generation down by 30%. However large reports needs to be swapped out to disc in order to save memory. The parameter sets the limit of XML data size (Kb). If the data is larger than this limit, the Formatting Processor (FOP) will use Disc Cache. A good setting for this is 100kB. This is also the default.

The machine name where the Crystal Web Service is installed
 

Reporting

The machine name to be used when accessing Crystal Web Service is installed. The default value is *.

The protocol of the Web Server where the Crystal Web Service is running
 

Reporting

The protocol to be used when accessing the Crystal Web Service. Normally this is the IIS default protocol. The default value is http.

The IIS port for the above mentioned Web Server
 

Reporting

The port to be used when accessing the Crystal Web Service. Normally this is the IIS default port. The default value is 80.

The Virtual Directory name given to the Crystal Web Service in IIS
 

Reporting

The Virtual Directory name be used when accessing the Crystal Web Service. This is the name one would specify when installing the Crystal Web Service. The default value is IFSCRWebSetup.

Specify if web database access security check is required
 

Reporting

Specify if web database access security check is required when previewing/printing Quick Reports. Default value is NO.

Default tablespace for dynamically created tables of IAL Owner Schema

Reporting

Default tablespace for dynamically created tables of IAL Owner Schema

Extended Server Url

Reporting

This is initially automatically set during the Extended Sever installation but can be edited manually here.

Make Report Designer PDF/A compliant

Reporting

Make Report Designer PDF/A compliant. Default value is NO.

Information Access Layer (IAL) create empty table when exception in creating temp table

Reporting

Information Access Layer (IAL) create empty table when exception in creating temp table.
Default value is YES.

Information Access Layer (IAL) - Maximum occurrences of erroneous schedule jobs

Reporting

Information Access Layer (IAL) - Maximum occurrences of erroneous schedule jobs.
Default value is 0.

Set automatic rotate and center for Report Designer layouts

Reporting

Set automatic rotate and center for Report Designer layouts.
Default value is ON.

Report rule advanced logging ON/OFF

Reporting

Report rule advanced logging.
Default value is OFF.

Default tablespace for dynamically created indexes of IAL Owner Schema

Reporting

Default tablespace for dynamically created indexes of IAL Owner Schema

Default logical printer ID to be used when none of the Report level or User level default Logical printer value is not set Reporting Specifies the default Logical Printer to use in Print Jobs when no Logical Printer is passed or when no user, report or user/report default Logical Printer is defined. Default value is NO_PRINTOUT.
Send a notification email when an archived report is distributed Reporting Specifies if to send a notification email to the distributed user(s) or users in a distribution group when a report is distributed. Default value is YES.
Prevent overwrite of report life when RDF is deployed Reporting Specifies if to overwrite the modified report lifetime changed through Report Definition with the report lifetime specified in the RDF. Default value is NO.
Message Queue for report email and routing Reporting Specifies the queue used by IFS Connect to send the generated report through email. This is also used to process the application message created when routing the report or the generated data through IFS Connect when printing to SEND_*_TO_CONNECT logical printers. Changing this requires a restart of the application server. The Default value is OUT1.

Ignore security info for application owner

Security

Values are ON/OFF/SHIFT and indicate whether fetching of security information may be skipped when running the application as application owner. Ignoring the security information will lead to a faster login. Option SHIFT gives the possibility to control this setting at runtime by pressing shift during login. Default value is SHIFT.

Cleanup age limit in days for Security Checkpoint Log

Security

The age of Security Checkpoint Log records to be removed by cleanup processes. Default value is 7 days.

Security checkpoint framework available

Security

This parameter determines whether Security Checkpoint framework is used. Values are ON/OFF, default value is OFF. ON means that Security Checkpoint Gates in the server code should be checked. OFF means that no Security Checkpoint check is performed.

Security Checkpoint username timeout

Security

Security Checkpoint username timeout. Default value is -1

Number of days to keep streams messages before removal

Streams

This parameter controls the number of days streams messages should be kept. Any messages older than this value will be removed by the cleanup process

Default file encoding for files read/written by Oracle

System Settings

This parameter controls which default character set a file will be written by Oracle Database server using UTL_FILE is using if Database_SYS package functionality. Default value is Oracle Database Character Set. Valid values are any Oracle Character Set.

Location to store BLOB data

System Settings

Values are EXT/INT/ASK and controls where the BLOB data should be saved or if the user should be asked for each save. Default value is ASK.

Stored decimals for objects using 'IFS Currency - Preserve Precision'

System Settings

Stored decimals for objects using 'IFS Currency - Preserve Precision'

Microsoft Bing Map license key for Virtual Map

System Settings

Microsoft Bing Map license key for Virtual Map

HTTP transfer timeout for outbound calls (seconds)

System Settings

HTTP transfer timeout for outbound calls (seconds).
Default is 1200.

Delete Object Connections When Parent Objects are Deleted

System Settings

If set as 'ON', the connections between the parent and attachments will be deleted when deleting parent objects. For example, if a business object which has  attached documents is deleted, the connections between the business object and attached documents will be deleted, not attached documents. Default value is 'OFF'.

Remote Debugging allowed,
should be OFF for production installations

System Settings

This parameter controls whether it is allowed to do Remote Debugging or not in this installation. The values is ON/OFF, default is OFF. It is recommended to set this parameter to OFF for production installations.

SQL Trace allowed System Settings Should be OFF for production installations
Profiling allowed System Settings Should be OFF for production installations
System Settings Profiling directory, where the profiler writes its files System Settings Not used
Name of the Application Owner System Settings Default Application Owner is IFSAPP
Name of the field that uniquely identifies an object in GIS Map System Settings This parameter identifies the field name on GIS Objects in ArcGIS and where IFS business object ID is stored. Default value for the field name is IFSID.
Customer Id to connect RCM Toolkit System Settings Customer Id to connect RCM Toolkit. Only available when RCM Integration is installed
Web service Token to connect RCM Toolkit System Settings Web service Token to connect RCM Toolkit. Only available when RCM Integration is installed
In-Memory compression level System Settings The level of compression to use when tables are loaded to the In-Memory storage. For futher information see here
Translation Environment Mode System Settings This is for R&D Internal use only.

Values are SUPP/DEV and controls the translation admin functionalities in the Text Translations window. 

Default value is DEV.

Touch Apps Extended Logging Touch Apps Values are ON/OFF and controls the logging details captured in the Mobile Logs.
Touch Apps Push Data Available Touch Apps Values are ON/OFF and controls the Database Process for managing the Touch Apps Push Queue.
Touch Apps Push Data Restartup Interval (seconds) Touch Apps Set frequency of the Database Process for managing the Mobile Push Queue. Default value is 30 seconds.
Touch Apps Queue (Batch) Touch Apps Batch Queue ID for the Mobile Batch Synchronization.
Touch Apps Queue (Push) Touch Apps Batch Queue ID for the Mobile Push Synchronization.
Touch Apps Sync Service Timeout (seconds) Touch Apps Mobile Synchronization Timeout for the database to wait for a response from the Extended Server.
Touch Apps Sync Warning Threshold (seconds) Touch Apps Threshold time for a single entity to be synchronized before a warning is written to the Mobile Logs.

Base address for HTML help

User Assistance

Base URL for the top-tree of the application end-user documentation when HTML is used as on-line document format. Default value is *.

Tips and Tricks

User Assistance

URL for Enterprise Explorer Tips & Tricks videos. The default value is http://www2.ifsworld.com/apps-instr-videos/default.htm.

Search dialog hints

User Assistance

Values are ON/OFF and control if the end users will receive hints in the search dialog or not. Note that it is necessary to generate Search Hint information to be able to use this feature. Default value is OFF.

Search dialog Match case Default

User Assistance

Search dialog Match case. Default is ON.

IFS Portal

User Assistance

IFS Portal. Default value is http://www.ifsworld.com/corp/login/

IFS online

User Assistance

URL for on-line helpdesk on Internet (towards vendor) or intranet (at customer side). Default value is http://www.ifsworld.com and should be changed to enable usage of IFS Support.

openIFS Community

User Assistance

openIFS Community

Default server language setup

 

User Settings

Controls the default language used in the server environment, when the client running the application defines no language. This parameter is to be used for translation test purposes. Default value is ‘en’ (English).

Default tablespace for
new Oracle users

User Settings

Controls which tablespace to use for new Oracle users created as an assigned Oracle user to a Foundation1 user. Default value is USERS

Temporary tablespace for
new Oracle users

User Settings

Controls which temporary tablespace to use for new Oracle users created as an assigned Oracle user to a Foundation1 user. Default value is TEMP

Default profile for new Oracle users

User Settings

Controls which Oracle profile an Oracle user is assigned to when created. Default value is DEFAULT.

Define the characters which should not appear in Key Fields

User Settings

This parameter can be set with characters which should not appear in the key fields. The key fields where the relevant business logic is implemented will not accept these characters and will return an error message. Moreover character ^ is the text separator in IFS so it will be validated internally and it is not required to be included.If multiple characters need to be restricted they should be enclosed within a pair of parentheses [ i.e - (XXX) ], in the default character set two periods '..' are restricted using this syntax. The Default character set is (..)&%_<>=;~”

Use the special markers LF and CR to include Carriage Return and Line Feed respectively.

Note: If ‘(‘ and ‘)’ are to be used as restricted characters, they have to be included as ‘((‘ and ‘))’ respectively.

Endpoint of the registered QnA service IFS Aurena Bot The endpoint of the customer-specific QnA service registered through QnA Maker. <protocol>://<QnA Service> . This should be entered by the System Administrator.
The QnA service Endpoint API Key IFS Aurena Bot This is the customer-specific QnA Service Endpoint API Key used for Authorization which required by the IFS Aurena Bot Service to initiate a connection with Customers' QnA service. An administrator should add this to system parameters.
The secret of the Direct Line channel IFS Aurena Bot IFS Aurena Bot client uses the Direct Line channel to make a connection to the Bot Service. An administrator should add this to system parameters and can get this key from Manage Service Team.
IFS Application Identification IFS Aurena Bot This is an identifier to uniquly identify the IFS Application installation. To add or update the system parameters, Administrators can get this key from Manage Service Team. <SYSTEM_ID>