Define Inspections on Modification

Explanation

This activity is used to define initial and continued inspections that should be performed prior to terminating the modification.

Initial and continued inspections are performed as recurring inspections until the terminating action is performed. Each step of the inspection is possible to define with one or more operational parameters and/or calendar interval. Terminating actions are defined by an operational parameter value, a calendar interval or as the next visit in workshop/next interval maintenance. When an inspection has been executed with remarks, it is possible to proceed to the next step of the inspection or to force the terminating action on the serial. You are required to indicate the next step to which to proceed when reporting the inspection, locally in Fleet and Asset Management or on the work order. It will be possible to define two steps per part, with an implicit third step:

• Step 1 determines the intervals of the initial inspection.
• Step 2 determines the increased or decreased incidence of the inspections.
• Step 3 is an implicit step that leads to the embodiment of the modification. The third step is a  terminating action.

An inspection for a modification might proceed as follows:

• Inspect aircraft every 400 FHR (flight hours) for evidence of cracks. If nothing is found after 2000 FHR from the effective date (recurs until 2000 FHR), terminate the inspection.
• If evidence of cracks are found after 400 FHR, increase the intensiveness of the inspections to 200 FHR. If nothing is found after 4000 FHR from the effective date, terminate the inspection.
• If evidence of cracks are found after 200 FHR, the modification must be embodied on the serial. Calculation of the due date to comply with the modification will start from the last execution of the 200 FHR inspection on the serial. Intervals to comply with the modification can be defined in operational parameters, calendar or such as the Next Visit in Workshop field.

Prerequisites

• A modification with the Preliminary status must be defined and parts must be assigned to the modification prior to the definition of the inspections.
• Before Continued Inspections can be registered, you must have first registered Initial Inspections.

System Effects

• Modification due calculation can be run to calculate the due dates for the initial and the continued inspections.

Window

Define Modification

Related Window Descriptions

Define Modification/Execution/Initial Inspections
Define Modification/Execution/Continued Inspections
Define Modification/Assign Parts

Procedure

To define initial and continued inspections:

1. Query the modification revision you want to register inspections for in the Define Modification window.
2. Click the Execution tab, query for the relevant assigned part number, and then click the Initial Inspections or Continued Inspections tab.
3. If you enter Operational Parameter, the fields Inspection Interval and Inspection Interval Limit become required fields. Values for the Calendar Interval, Calendar Unit, Calendar Limit, and Calendar Unit Limit fields cannot then be entered.
4. If the inspection is to take place based on calendar time (instead of or in addition to operational use), you must enter a Calendar Interval. If a value is entered in the Calendar Interval field, Calendar Unit and Calendar Limit become required fields. The fields Operational Parameter, Inspection Interval, and Inspection Interval Limit cannot then be entered.
5. Click Save.